Product Code: 23662

Everbuild X3 Paint and Varnish StripperRemover 1 Litre

�

�

�

�

�

Everbuild X3 Paint and Varnish RemoverStripper

Product Option: 1Litre STRIPX1

Description:

The non-caustic formulation is simple and easyto use both indoors and out.

Extremely effective non Methylene Chloridepaint stripper ideal for use by DIY or professionalusers.�

�

X3 Notes andBenefits:

1 Litre

Works on all common types of paint andvarnish.�

Removes up to 3 layers of paint perapplication.

Non flammable

Non drip formula.

Methylene Chloride free.

Shake container well before use.

May not work on some hardened painttypes

�

Product ApplicationNotes:

Wear protective gloves. Pour a quantity of X3 Triple Action Paint and VarnishStripper into a suitable container or a clean paint kettle.

For each application apply a generous even coatonto the surface to be stripped with a suitable brush,

Leave for approximately 30 minutes and apply asecond coat.

For areas where there are less than 5 layers ofpaint or varnish, a second coat may not always benecessary.

Allow the stripper to work for at least onehour then check to see how far it has penetrated

Depending upon the paint type the stripper willremove between 3-5 coats per dual coat application afterapproximately one hour.

Once the stripper has penetrated to thesubstrate or the initial 3-5 layers of paint, scrape off using ascraper or shavehook depending on surface, leaving surface as clean aspossible.

For multiple layers repeat application untilall paint has been removed, then rub down stripped area using ascrubbing brush or stainless steel pad and water. Rinse with waterand allow to dry.

�

Notes:

Please note that some paints are extremelyresistant to paint strippers such as some wheel coatings and powdercoating.

�

Datasheets:

Everbuild X3 Technical Data Sheet

Everbuild X3 MSDS Safety Data Sheet