Product Code: 29658

Everbuild Pro 180 Professional Joinery Adhesive Box of 12

�

�

�

�

Everbuild Pro 180 Professional Joinery Adhesive Box of 12

Trade Product Option: PRO180-12

EVERBUILD PRO180 JOINERY ADHESIVE BOX OF 12

One-part, fast moisture-curing polyurethane joinery adhesive which sets hard in just 6 minutes.

Perfect for use on floorboard joists as the product gives a strong, permanent bond; removing board movement to help give creak free joints.

Suitable for indoor and outdoor use.

Everbuild PRO 180 will adhere to a multitude of substrates, and can be overpainted once dry.

Pro180 conforms to EN204 D4 for water resistance.

The product foams slightly on application to fill small gaps, which increases bond strength.

�

Benefits:

Trade Product Option Box of 12

Fast and easy application.

Suitable for interior and exterior use.

Good chemical resistance.

Weather resistant.

Can be overpainted once dry.

Bridges gaps.

Sound deadening.

Excellent primer-less adhesion.

�

Areas Pro 180 Can be Used:

Joinery and floorboard applications such as fixing boards, carpet grippers, edgings, stair nosings etc.

Removes board movement.

Can be used to bond most types of wood - hard, soft, exotic and painted wood.

Adheres to metal, stone, concrete, brick, masonry and some plastics also.

Can be used in Window and door frame manufacture.

Wall panels, skirting, cladding etc.

�

Product Limitations:

At least one of the surfaces to be bonded must be porous.

Not suitable for polyethylene, polypropylene, Teflon or Nylon.

Surfaces may be damp, but moisture content of wood must not exceed 30% w/w.

As product expands slightly on curing, do not use on sheet laminate;

use STICK 2 CONTACT ADHESIVE.

Do not use for children?s toys and articles which can be placed in the mouth by children.

�

Notes:

Only apply between +5�C and + 35�C.

Ensure surfaces are always clamped during use.

Setting times will be increased at low temperatures and low humidity.

�

Surface Preparation:

The surfaces to be glued should be clean and free from dust, grease and other contaminants. At least one of the materials must be porous. Roughen non-porous surfaces to give a key for the adhesive.

To assist cure and achieve maximum bond strength, slightly moisten one surface with a damp cloth. Do not over wet.

�

Everbuild PRO180 Datasheets:

�

Technical Data Sheet

MSDS Safety Data Sheet

�

Related Product:

�

�