Product Code: 27208

Everbuild Quick Drying Ultra Hard Clear Floor Varnish Gloss 750ml

�

�

�

Everbuild Floor Varnish Clear Gloss 750ml

Barcode: 5029347612580

Product Code: FLOORVGL07

Description:

750ml Quick drying varnish ideal for use on most common types of wooden floors including hardwood, softwood, hardboard, chipboard and composite wooden boards.�

Everbuild Ultra Hard Floor Varnish has been specifically developed to provide an ultra-hard scratch resistant natural finish to most interior wooden floors. Suitable for use in kitchens, bathrooms, lounge, dining areas or where heavy foot traffic would be expected.

�

Low Solvent Formula

Touch dry in 30 minutes.

Protects wood against scratches and spills.

Clear finish, no discoloration. �

�

Surface Preparation:

�

On unvarnished floors ensure wood is clean, dry and free from dirt or dust by wiping with a soft cloth and white spirit.� Any existing coatings must be removed prior to application with a suitable sander using 120 grade abrasive paper. A suitable dust mask should be worn while sanding. Allow any dust to settle then vacuum the floor to remove any dust or debris.� Fill in any holes or surface imperfections using Everbuild Multi-Purpose Wood Filler.

�

Existing varnished floors should be thoroughly sanded using 120 grade abrasive paper to provide a key for Everbuild Ultra Hard Varnish to be applied.� Floors should be vacuumed, wiped down with white spirit and allowed to dry.� Any existing varnish in poor condition should be completely removed prior to application.

�

Application:

Stir product well before use and periodically during application.� Brush apply Everbuild Ultra Hard Floor Varnish following the direction of the wood grain.� Apply a minimum of 3 coats allowing 1 hour between coats.� Lightly sand the surface before applying the final coat.� Always apply the varnish to a wet edge working systematically across the surface keeping the wet edge together as much as possible to avoid overlap.

�

Ultra Hard Floor Varnish can be walked on after approximately 8 hours depending on ambient temperature and conditions.� Allow 72 hours before subjecting to heavy foot traffic.� Do not cover with carpets or rugs for at least 7 days.� Protect from water for 5 days. Clean brushes thoroughly after use with warm soapy water.

�

Related Products:

�

�

FLOORVGL07 Everbuild Datasheets:

�