Product Code: 23579

Everbuild Black Jack Self AdhesiveFlashing Tape 10m x 75mm Box 8

�

�

�

�

Everbuild Flashing Tape 10m x75mm

Product Option: FLAS075 - Box of8

75mm Wide Aluminium foil and bitumen rubberself adhesive flashing tape

The adhesive forms a strong waterproof sealby the simply pressing the tape into place by hand orroller.

�

Areas of Use andBenefits:

Replaces need for expensive leadflashing.

Self-adhesive requires no separateglue.

General repair to existingflashing.

Flashing bituminous felt and similar typesof roofs.

Flashing parapet walls.

Sealing roof glazing.

Replacing lost lead flashing.

Repairs to cracks in concrete.

Repairs to lead gutters.

Sealing capping bolts in roofsheets.

Sealing roof ridges.

Flashing between timber brickwork orblockwork cavities.

Flashing of skylights

�

Preparation andApplication:

Surfaces must be dry,

Sound free from oil, grease anddust

Remove all loose materialby scraper or wire brush.

Porous surfaces, such asconcrete or brick, should be primed using Everbuild flashing tape primer.

Cut to the required length.

Peel beck approximately 5cm of releasecarrier and place the tape into position.

Continue removing the release carrier whilstfirmly placing the tape

Avoid unnecessary creasing.

Ensure intimate contact and ensure no air istrapped.

Using a smallseam roller ensure that all edges and overlapsare sealed properly.

Overlaps should be at least 25mm.

Awkward areas and tops ofexisting lead flashing can be pointed using Everbuild Lead mate or Sika lead and gutter sealant.

�

Important ProductNotes:

Prime porous surfaceswith Everbuild flashing primer.

Do not apply to damp surfaces.

In cold weather adhesion may bereduced.

Bring up to temperature or heat bitumenadhesive layer with a hot air gun to improve adhesion andpliability.

�

�

Flashing Tape DataSheets:

�

75mm Flashing Tape Technical DataSheet

75mm Flashing Tape MSDS Safety DataSheet

�

RelatedProduct:

�