Product Code: 25796
Everbuild 409 Block Guard Paving and Joint Sand Stabiliser 5 litre Box 4
�
�
�
�
Everbuild 409 Block Guard Block Paving Resin Sealer 5 litre Box of 4
Product Option: BLOCKGUARD5-4
EVERBUILD BLOCK GUARD is a block paving seal and joint stabiliser based on a clear solvent based acrylic formula. BLOCK GUARD is designed to form a durable seal over block paving and other mineral paving/flags.
Penetrates deeply into blocks and sand then cures by solvent evaporation to give a long lasting seal which is resistant to sunlight, water, oil and petrol.
�
Approximate Usage:
Varies according to substrate. Average 2.2m� per litre per coat.
Re-coatable after approximately 3 to 4hrs minimum between coats but not before.
2 coats recommended but not essential
�
Areas For Use:
Block paved drives and pathways.
Natural stone patio areas.
Cement based flagstones.
�
Benefits:
Long lasting acrylic based formula.
Helps facilitate easier cleaning.
Contains a powerful fungicide to help prevent the growth of mould, fungus or weeds.
�
BLOCKGUARD5-4 Datasheets:
�
Technical Data Sheet
MSDS Safety Data Sheet
�
"Important Note this is a non returnable product "
While in our care all products are kept in a climate controlled store room.
We recommend storing this product out of direct sunlight until used.
Visit the Sealants and Tools Direct Ltd website for more information on Everbuild 409 Block Guard Block Paving Resin Sealer 5 litre Box of 4