Von Duprin Escape Hardware - Flood Defence Doors

PAS 1188-1:2009. Flood Protection Products. Specification. Part 1: Building Aperture Products Effective July 2014 and in association with our colleagues at Loddon Door Services Ltd, Relcross is pleased to announce that the following product is certified for use on outward opening flood defence doors: Specifically: PAS 1188-1:2009. Flood protection products. Specification. Part 1: Building Aperture Products PAS 1188-1 applies to flood protection products used in the temporary sealing of building apertures and entrances to properties, in the event of static flood water rising up to a level between 600 mm and 900 mm above ground level. 98/9957 - Surface Mounted Three Point Latching Device Characteristics Our flagship range of architectural grade escape devices includes the 98 Series with its smooth mechanism case and the established 99 Series with its familiar grooved design. The two styles are mechanically and dimensionally identical and provide a wide selection of additional features to suit many applications. The Quiet One® A fluid dampener decelerates the touch bar on its return stroke and eliminates most noise associated with exit device operations. Furnished on all 98/99 Series Exit Devices UK Fire Certification in accordance with EN 1634-1:2000 (timber) WFRC No. C132276 120mins BS EN 1125:1997 CE Certified. Features & Benefits Device Functions - Ships ready for functions; EO, DT & NL - for TP, K & L remove the NL drive screw from the reverse of the device Universal - Non-handed, suits LH & RH doors except when SD (Special Dogging) & -2 (Double Cylinder) features are included Device Lengths - Standard device suits doors to 915mm, optional device suits doors to 1220mm Door Height - Standard door height accommodated - 2134mm, extension rods are available for doors to 3048mm. Extension Rod Lengths - 305mm & 914mm Finishes - US28 (628) Anodized Aluminium. Alternative plated finishes are available to special order (consult Relcross for details) Strikes - Ships with standard 299 roller strike, bottom strikes 248L-4 and 304L. Optional strikes are available to suit alternative frame details (consult Relcross for details) Dogging Feature - Hex Key Dogging keeps the latch bolt held back for free swinging operation. Options available to special order - CD Cylinder Dogging, SD Special Dogging & LD Less Dogging Electric Options - LX Latchbolt Monitor Switch RX Touch Bar Monitor Switch RX2 Double Touch Bar Monitor Switch ALK Alarm Exit Kit EL Electric Latch Retraction PN Pneumatic Latch Retraction CX Chexit Delayed Exit Fasteners - Includes fixings for both metal and timber doors 19mm 425 for bolt through fixings Latch Bolt - Deadlocking anti-friction top & bottom bolts with16mm throw Recommendations for Installing & Fixing In accordance with BS EN 1125:1997 Annexe A (informative) the device should be installed with the touch bar normally at a height between 900mm and 1100mm from the finished floor level when the door is in the secure position. Where it is known that the majority of the occupants of the premises will be young children, it is acceptable to reduce the fixing height accordingly. Strikes for 9857/9957 Surface Mounted Vertical Rod Devices 299 Top & Middle Roller Strike with 21mm projection (top), used with conventional frames where a reveal >32mm exists, (middle) used with conventional frames where the door stile width >121mm permits the necessary back set. 248L-4 Bottom Strike for use with flat top thresholds. Since the strike projects by 10mm care should be taken to ensure installation does not pose a trip hazard 304L Optional Bottom Strike for use where a mortice installation is desired. Please note - Both the 248L-4 & 304L Bottom Strikes are supplied as standard with all surface mounted vertical rod devices. Optional Trim (for Outside Access) Please refer to the 98/9957 Data Sheet (part 2) on the next tab. 9857/9957 Series - Three Point Latching Device Standard Trim How to Specify or Order 9857 Surface Mounted Three Point Latching Device for Doors <915mm 9857 Surface Mounted Three Point Latching Device for Doors <1220mm 9957 Surface Mounted Three Point Latching Device for Doors <915mm 9957 Surface Mounted Three Point Latching Device for Doors <1220mm add suffix - EO - Exit Only DT - Dummy Trim NL - Night Latch Trim TP - Thumb Piece Trim K - Knob Trim L - Lever Trim Finishes US28 - Satin Anodized Aluminium US32D - Satin Stainless Steel (98 Series) see also: Escape Hardware For more information relating to this specialist area, please contact us via E Mail or call the Sales Office on +44 (0)1380 729600. We shall be pleased to assist you with your specification.