Ultra Floor Level IT Top - Heavy Duty Abrasive Resistant Surface - 48 No. x 25 kg Bags

Product Code: 31092

UltraFloor Level IT Top is a polymer rich, high strength, single part, cementitious smoothing underlayment incorporating recycled raw materials. It has exceptional abrasion resistance and is designed for use as a finished wear surface in both industrial and commercial applications. Its early strength development formulation also makes it ideal for overcoating with resin coatings.\n?\n\nSurface finish\nIndustrial applications\nPump or trowel applied\nForklift traffic at 36 hours\nMoisture tolerant\nCoverage: approx 3.1m? at 5mm\n5-15mm thickness\nWorking time 30-40 minutes\nFoot traffic 2-3 hours Internal floors\nSize: 25kg\n\n?\nINFORMATION\nUltra Floor Level IT TOP is a polymer rich, high strength, single part, cementitious smoothing underlayment incorporating recycled raw materials. It has exceptional abrasion resistance and is designed for use as a finished wear surface in both industrial and commercial applications. Its early strength development formulation also makes it ideal for overcoating with resin coatings.\nWhen mixed with clean cold water, Level IT TOP is a product that can be trowel or pump applied, to smooth and level, sound and strong internal subfloors where a finished wear surface is required. It is suitable for use in heavily trafficked areas such as warehouses, storage areas, corridors and factory units. It is ready to receive fork lift traffic after as little as 36 hours. For projects where the visual aspects of the floor are important it must be noted that we cannot guarantee colour consistency in the product due to variables in raw materials and in application methods. Level IT TOP can be overcoated with resin coatings and sealers in situations where an aesthetic finish is required and where Level IT TOP needs protection from chemicals, oils and other liquid ingress or if an improved slip resistance is required.\nLevel IT TOP has a protein free formulation so may be used in biologically sensitive areas, it can be applied to most cementitious subfloors including those incorporating fully commissioned warm water underfloor heating systems. It may also be used over fully cured and dry calcium sulphate screeds. Level lT Top is ideal for use in conjunction with Ultra Floor Level IT BASE (see relevant technical datasheet) where product application exceeds 15mm.\nLevel IT TOP should be applied at a minimum application thickness of 5mm and can be applied up to maximum 15mm.\nPLEASE SEE THE ABOVE TAB FOR TECHNICAL DATA SHEET