Ultra Floor Level IT Super30 - Rapid Setting - 48 No. x Bags & Bottles

Product Code: 31088

UltraFloor Level IT Super30 is a high specification, high strength, rapid drying and curing two-part cementitious smoothing underlayment. Designed for fast turnaround projects, Level IT Super30 is suitable for use as an underlayment for most floor coverings including sheet vinyl, LVT, linoleum and rubber and breathable textiles.\n?\n\nRapid curing\nExtremely smooth finish\n30 minute walk on time\nBonded floor coverings after 3 hours\nLoose lay in 45 minutes (unbonded textiles)\nCoverage: approx 5m? at 3mm\n2-15mm thickness\nOpen time up to 10 minutes\nInternal floors Size: 20kg bag and 4ltr bottle\n\n?\nINFORMATION\nUltra Floor Level IT SUPER30 is a high specification, high strength, rapid drying and curing two part cementitious smoothing underlayment. It consists of a powdered component incorporating a blend of high specifications cements, with graded fillers and additives and a pre-gauged polymer liquid.\nThe two components are mixed to provide a rapid setting and curing, free flowing smoothing underlayment for smoothing strong, sound internal floors, prior to the application of decorative floor coverings. Its rapid set and curing profile enables decorative floor coverings to be loose laid in as little as 45 minutes (unbonded textiles) and fully bonded in just 3 hours after application. This makes it an ideal choice for use in areas where it is necessary to carry out installations in a short timeframe. This includes “Lay in a Day” projects and highly used areas such as corridors, atriums and lobby areas.\nIts protein free formulation means it is ideal for use in biologically sensitive areas. It can be used on a variety of subfloors, and is suitable for use where warm water underfloor heating is incorporated.\nLevel IT SUPER30 can be applied between thicknesses of 2-15mm. Its initial set is approximately 15 minutes with a walk on time of 30 minutes. It is necessary to maintain a wet edge between mixes so working practices should be adjusted accordingly, to ensure this can be achieved within the products open time. Applications up to 5mm thick can normally receive floor coverings after approximately 3 hours (based on good ambient conditions).\nPLEASE SEE THE ABOVE TAB FOR TECHNICAL DATA SHEET