Mapei Ultraplan Eco 23Kg - Full Pallet Deal - 40 bags

Product Code: 30145

Ultra-fast hardening self-levelling compound with very low VOC (volatile organic compound)\nWHERE TO USEUltraplan Eco is used for interior levelling and removing differences in thickness from 1 to 10 mm of new or existing substrates, preparing them to receive any kind of flooring where excellent resistance to loads and traffic is needed.\nUltraplan Eco is particularly suitable for areas subject to wheeled chairs.\nUltraplan Eco is for interior use only.\nSome application examples• Levelling concrete slabs, cement, Mapecem, Mapecem Pronto, Topcem or Topcem Pronto, anhydrite and magnesite based screeds with underfloor heating systems incorporated.• Levelling existing cement, terrazzo, ceramic and natural stone floors.\nTECHNICAL CHARACTERISTICSUltraplan Eco is a grey powder consisting of special cements with rapid setting and hydration together with graded silica sand, resins and special additives, according to a formula developed in the MAPEI Research and Development Laboratories.Mixed with water Ultraplan Eco becomes a highly fluid and easily workable mortar, which is self-levelling, with high adhesion to the substrate and dries ultra-quickly.\nUltraplan Eco can be applied with an automatic pressure pump for distances over 100 m.\nUltraplan Eco can be spread in thicknesses up to 10 mm per coat without shrinkage, cracking or crazing, and develops very high compressive and flexural strength, as well as resistance to indentation and abrasion.\nUltraplan Eco is ready to receive flooring after approximately 12 hours, regardless of the thickness. It is recommended to wait 24 hours before installing wooden flooring. Ultraplan Eco’s VOC content is practically zero, certified by the TFI German Institute, so is harmless to the health of the installer and the end-user.\nRECOMMENDATIONS• Do not add water to a mix which has already started to set.• Do not add lime, cement or gypsum to the mix.• Do not use Ultraplan Eco for exterior levelling work.• Do not use Ultraplan Eco on substrates subject to continuous rising damp.• If a coat of Ultraplan Eco needs to be applied once the preceding one is completely dry, first apply Eco Prim R.• Do not apply Ultraplan Eco at temperatures below +5?C.• Do not apply Ultraplan Eco at thicknesses less than 3 mm when wooden flooring is to be installed.\nSEE TECHNICAL DATA SHEET FOR MORE INFORMATION