Mapei Mapelastic Smart Pallet Deal 25 Bags (20Kg) & 25 Admix (10Kg)

Product Code: 30149

Two-component, highly flexible cementitious mortar, to be applied by brush or with a roller, for waterproofing concrete surfaces such as foundations, retaining walls, balconies, terraces, basins and swimming pools and for protection against aggressive chemical agents\nWHERE TO USEMapelastic Smart is used to protect new concrete structures, concrete structures repaired using special mortars from the Mapegrout or Planitop ranges, renders with hairline cracks and cementitious surfaces in general which, being subject to vibrations, may suffer from cracking, and for waterproofing hydraulic projects such as channels and faces of dams and swimming pools, basins, storage tanks, balconies and terraces. Particularly suitable for waterproofing irregular surfaces.\nSome application examples\n\nWaterproofing hydraulic channels, faces of dams and basins.\nWaterproofing bathrooms, showers, balconies, terraces, swimming pools etc. before laying ceramic tiles.\nWaterproofing plasterboard, render or cementitious surfaces, lightweight cement blocks and marine-grade plywood.\nFlexible protection layer of new concrete structures or repaired structures subject to minor deformation under load.\nProtection of cementitious renders or concrete with cracks due to shrinkage, minor movement caused by thermal gradients or dynamic stresses due to the passage of vehicles, against infiltration of water and aggressive elements from the atmosphere.\nProtection of concrete pillars and joists and road and railway viaducts repaired with products from the Mapegrout or Planitop ranges against the penetration of carbon dioxide.\nProtection of structures with an inadequate layer of concrete over the reinforcement rods against the penetration of aggressive elements.\nProtection of concrete surfaces which may come into contact with sea water, de-icing salts, such as sodium or calcium chloride, and sulphates.\n\nTECHNICAL CHARACTERISTICSMapelastic Smart is a two-component mortar based on cementitious binders, fie-grained selected aggregates, special additives and synthetic polymers in water dispersion, blended according to a formula developed in MAPEI's own research laboratories.When the two components are mixed, a blend with a plastic consistency is obtained. It may be applied by brush, by roller or by spraying with a worm screw rendering machine on both horizontal and vertical surfaces at a thickness of approximately 2 mm.Thanks to the content and high quality of the synthetic resins, the hardened layer of Mapelastic Smart remains constantly flexible under all environmental conditions. Mapelastic Smart is completely waterproof up to a pressure of 1.5 bar and resistant to the penetration of aggressive substances which are present in the atmosphere, such as carbon dioxide, sulphur dioxide and sulphuric anhydride, and soluble salts such as chlorides and sulphates, which are present in seawater or in the ground.Mapelastic Smart has excellent bonding properties on all cementitious, ceramic and marble surfaces as long as they are sound and sufficiently clean.This property, together with its resistance to the deteriorating effect of UV rays, a characteristic of this product, ensures that structures protected and waterproofed with Mapelastic Smart have a long service life, even if they are located in areas with particularly rigid climatic conditions, in coastal areas with a saline-rich atmosphere or in industrial areas where the air is particularly polluted.\nMapelastic Smart meets the requirements defined by EN 1504-9 ("Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - General principles for the use of products and systems") and the minimum requirements claimed by EN 1504-2 coating (C) according to the PI, MC and IR principles ("Protection systems for concrete surfaces").\nSEE TECHNICAL DATA SHEET FOR MORE INFORMATION