Mapei Mapeker 20Kg - White - Full Pallet Deal - 48 bags

Product Code: 30155

Cement-based rapidsetting adhesive for interior and exterior floor and wall installations of ceramic and porcelain tiles and stone\n \nUses;\n \n\n\nWalls & Floors \nInternal & External \nSwimming Pools \n\n\n\nWall Backgrounds;\n\nConcrete \nCementitious Mortars \nGypsum Plaster*** \nGypsum Boards \nConcrete Blocks \nExisting Ceramics \nFibrous Concrete Panels \n\nFloor Bases;\n\nCementitious Screeds \nConcrete Slabs \nMapei Levelling Comounds \nAsphalt Screeds \nAnhydrite Screeds (** & ***) \nUnderfloor Heating \nExisting Ceramic, Terrazzo, Stone \nMarine Ply \n\n(** Must be Mechanically Abraded) (*** Prime First)\n\n?\n?\nCoverage Ceramic-tiling mosaics and small size tiles (trowel no. 4): 2 kg/m2; normal size tiles (trowel no. 5): 2.5-3 kg/m2; large sizes, floors, exteriors (trowel no. 6 or 10 or larger): 4-5kg/m2\nCement-based rapidsetting adhesive for interior and exterior floor and wall installations of ceramic and porcelain tiles and non-moisture sensitive natural stone\nCLASSIFICATION IN COMPLIANCE WITH EN 12004 Mapeker Rapid-Set Flex is an improved (2), fast setting (F) cementitious (C) adhesive classified as C2F.\nWHERE TO USE Interior and exterior bonding of ceramic and porcelain tiles and mosaics and natural stone materials that are not sensitive to moisture. Use Mapeker Rapid-Set Flex white for the installation of light coloured natural stone. Spot bonding of insulating materials such as expanded polystyrene and polyurethane, gypsum board, glass and rock wool, wood-cement panels, formed-concrete blocks, sound-deadening panels etc.\nSome application examples\n\nRapid installation or renovation in areas subjected to pedestrian traffic. \nRapid repair work in bathrooms, showers, kitchens, terraces and balconies. \nInstalling marble and other natural stone not sensitive to moisture. \nRapid installation onto rigid plywood overlaid floors (min. 15 mm ply). \nUnderfloor Heating Installations \n\nTECHNICAL CHARACTERISTICS Mapeker Rapid-Set Flex is a powder composed of a mixture of special cements, selectively-graded aggregates, synthetic resins and setting accelerators that develop high bond strength only 3 hours after setting. For this reason floor and wall installations can be completed very quickly. Floors can be walked on after only 3 hours and are ready for general traffic after 24 hours. Mapeker Rapid-Set Flex when hardened is frost-proof and water resistant.\nRECOMMENDATIONS\n\nOn walls or floors subject to flexing or vibration (wooden or cement-fibre boards, gypsum boards, cement boards etc.) use a highly flexible adhesive (for example Keraquick mixed with Latex Plus). \nMechanically abrade anhydrite screeds and prime with Eco Prim T or Primer G. \nOn gypsum boards use flexible adhesives (for example Mapegrip D2 / Keraflex). \nOn gypsum walls or gypsum plasters, apply a coat of Primer G before fixing with cement-based adhesives. \nOn metal surfaces use Keralastic. \nFor bonding expanded polystyrene insulating panels with a protective film use Mapegrip D2. \nPlywood overlaid floors must use a minimum of 15 mm WBP or marine grade plywood and be fixed at maximum 300 mm centres in all directions to provide a rigid substrate. \nNot suitable for use on plywood direct to joists or for floating floors. \n\nSEE TECHNICAL DATA SHEET FOR MORE INFORMATION