Mapei Mapeguard WP 200 - Waterproofing & Decoupling Membrane - 30m

Product Code: 30986

Mapei Mapeguard WP 200 - Waterproofing & Decoupling Membrane, Alkali-resistant, waterproofing and decoupling membrane under ceramic and natural stone tiles\nWHERE TO USE Waterproofing and decoupling membrane, made of soft polyethylene, for direct application under ceramic and natural stone tiles with thin-set mortar.\nSOME APPLICATION EXAMPLES\n\nMapeguard WP 200 is a bonded waterproofing and decoupling membrane used in wet and damp areas in residential and commercial buildings such as domestic and hotel bathrooms, private or commercial showers, whorls of swimming pools and small size balcons\nWaterproofing membrane on moisture-sensitive substrates (such as gypsum plasters and gypsum fiber boards, calcium sulphate screeds) and mineral surfaces (such as cement plaster, porous concrete, concrete, cement screed, cement-based panels).\nAnti-Fracture membrane to prevent cracked tiles where movement / thermal stress may be present. For example, installing on a challenging substrate such as a heated floor system.\n\n?\nTECHNICAL CHARACTERISTICS\nMapeguard WP 200 is a flexible, thin-layer, waterproof isolating sheet of polyethylene, coated on both sides with a non-woven polypropylene fabric. The non-woven fabric ensures a relevant bond strength of the adhesive between the membrane and the substrate/covering.\n\nColour - Grey\nTotal Width - 1000mm (+/-5mm)\nTotal Thickness (approx) - 0.44 - 048mm\nMaterial Weight (approx) - 251 - 256 g/sq./m\nResistant to Temp min/max -? -30 / +90 degree celsius\n\n?\nPROPERTIES\n\nWaterproofing.\nHigh tensile strength.\nHigh tensile bond strength adhesive connection with tile adhesives.\nAlkali-resistant.\n\n?\nRECOMMENDATIONS\n\nDo not use Mapeguard WP 200 if the environmental temperature is lower than +5?C.\nThe use of Mapeguard WP 200 as a decoupling membrane does not avoid the need of movement joints.\nMapeguard WP 200 is not permanent UV-resistant and so it has to be covered with a ceramic or natural stone.\nAll the in force national peculiarities and guidelines have to be observed.\nDo not apply any smoothing layer after the bonding of Mapeguard WP 200.\nSEE TECHNICAL DATA SHEET FOR MORE INFORMATION