Product Code: 29946
A solvent based acrylate sealant that produces a high sheen finish, whilst intensifying and protecting the colours and aids maintenance on riven / rough multi-coloured slate.\nDescription:?A special product from the LITHOFIN-Range for marble, natural and engineered stone (MN). This ready-to-use sealant contains high quality acrylate.\nProperties:Lithofin MN Slate-Seal forms a high gloss film on the surface which closes the pores of the stone.?This treatment prevents water and dirt from penetrating into the surface, making it easier to maintain.?The permeability of the stone is greatly reduced.?Product is suitable for indoor use only and is not recommended for worktops or bathrooms/wetrooms.?The colour structure of the stone is intensified; the surface develops a “wet look”.??\nSurfaces:?Nearly all absorbent, porous natural stones (e.g. granite, gneiss, marble, limestone, slate, etc.) and engineered stones.Field of use:For glossy sealing of rough and honed natural and concrete, stone surfaces. Embellishes the appearance and facilitates maintenance.\nDirections for Use:The surface to be treated must be completely dry and clean.Always try the product in an inconspicuous area prior to use.In the case of highly absorbent surfaces, it may be necessary to apply a second thin coat.Evenly apply Lithofin MN Slate-Seal with a clean foam roller or brush.??Application Temperature:?The temperature of the surface should be between 5?C and 25?C. Switch off under floor heating.?\nDrying time:Safe to walk on after approx. 45 minutes, completely dry after 24 hours.?\nPlease Note:Non-absorbent, polished or very finely honed surfaces can not be sealed.?Moisture inside the stone will cause the sealant to turn white.Please ensure that no moisture can penetrate into the sealed surface, and that moisture can not be transported through the surface from the ground.Lithofin MN Slate-Seal can be removed from the surface with Lithofin WAX-OFF.?Tools can be cleaned with Lithofin WAXOFF.?Glass, wood, varnish, plastics and other surfaces sensitive to solvents must be protected against splashes\nDurability:?With correct maintenance and depending on the level of wear and tear up to several years.\nDirections for use:?In the case of highly absorbent surfaces, it may be necessary to apply a second thin coat.Evenly apply Lithofin MN Slate-Seal with a clean foam roller or brush.?Always try the product in an inconspicuous area prior to use.The surface to be treated must be completely dry and clean.\nCoverage:?Approx. 20m?/litre on honed concrete stone?Approx. 12m?/litre on sawn graniteApprox.?10m?/litre on rough limestone\nStorage:?Keep closed, cool and dry. Shelf life of up to 5 years. Open containers should be used quickly.\nEnvironmental Protection:Contains solvents, free of chlorinated hydrocarbons.\nDisposal:?liquid product is classified as special waste.Clean containers can be recycled through collection systems.?Containers are made of environmentally friendly tin plate.?\nall cases of doubt, test the product first in an inconspicuous area.
Visit the Pure Adhesion Ltd website for more information on Lithofin MN Slate Seal High Gloss Sealer - 5 Litre