Product Code: 30865
DescriptionA special product from the LITHOFIN-Range for marble, natural and engineered stone (MN). Solvent based polishing liquid containing high quality waxes.\nNoteLithofin MN Polish (liquid) does not contain any environmentally problematic CHC's like trichlorethen or similar solvents.\nPropertiesHigh quality raw materials guarantee optimal protective and maintenance properties, easy polishing and high durability. The first application already produces a polishable film, which can be brought to a high gloss through polishing by hand or machine. Lithofin MN Polish (liquid) improves the stone’s appearance by enhancing the colour structure and facilitates regular maintenance.\nField of UseFor the initial treatment of newly installed natural and engineered stone surfaces, window sills, table tops, etc. to improve the appearance and provide protection. Also to freshen up worn and dull stone surfaces.\nSurfacesAll finely honed and polished natural stones such as marble, limestone, travertine, slate, granite, etc. as well as engineered stone, agglo marble and terrazzo.\nDirections for UseTurn off under floor heating. Shake bottle before use. Thinly and evenly apply Lithofin MN Polish (liquid) with a clean cloth and allow the product to dry. Then polish with a soft linen cloth or polishing pad. Highly absorbent surfaces may have to be treated more than once.\nPlease NoteThe surface to be treated must be completely clean and dry. Do not apply in temperatures below 15?C and above 25?C. Protect surfaces sensitive to solvents. Lithofin MN Polish (liquid) is suitable for indoor use only. Well-honed surfaces are a prerequisite for good results. If the application is patchy, polish off with steel wool. Layer forming products affect the slip resistant properties of the surface. We highly recommend trying the product in an inconspicuous area prior to use.\nLithofin MN Polish (liquid) can be removed with Lithofin MN Power-Clean or in extremely stubborn cases with Lithofin WAX-OFF.\nOn smaller surfaces, use Lithofin MN Polish Cream.\nCoverage15 to 20m?/Ltr. depending on the surface.\nDrying TimeAfter 5-10 min ready for polish. Completely dry after 50-60 min.\nDurabilityResistant to regular household dirt and salt, not resistant to petrol and similar substances. Depending on the level of wear and tear, the product’s effect will last for several months.
Visit the Pure Adhesion Ltd website for more information on Lithofin MN Polish Liquid for Finely Honed & Polished Stones - 1 Litre