Product Code: 29864
A special product from the LITHOFIN-Range for porcelain, ceramic and quarry tiles (KF). The solvent free acrylate sealant can be diluted with water and is easy to use.\nProperties:Once dry, Lithofin KF Tile Polish forms a film that gives dull, matt and rough surfaces an elegant sheen. Dirt will no longer penetrate into the surface and can easily be wiped away. Rough surfaces become smoother and therefore easier to maintain. The film protects the surface, while at the same time enhancing its appearance by slightly darkening the colours. Existing marks of wear and tear are masked and become less visible.\nTechnical Data:Density: approx. 1.0 g/cm?pH-Value: approx. 9Appearance: milky-whiteOdour: nearly odourless\nField of Use:Lithofin KF Tile Polish has been specifically developed for ceramic surfaces, such as unglazed, quarry and clay tiles. The surface film enhances the appearance and facilitates maintenance. Lithofin KF Tile Polish is not recommended for outdoor areas and for surfaces subject to heavy wear and tear. Not suitable for glazed and polished tiles.\nDirections for Use:The surface must be clean and completely dry. Remove dirt deposits and old care product residues with the suitable LITHOFIN cleaner. Evenly apply Lithofin KF Tile Polish in undiluted form using an applicator, sponge or lint free cloth. The product may be used diluted with water, if the surface is not very absorbent. The amount of product to be applied depends on the absorbency of the tile; make sure you leave a clearly visible film of moisture on the surface. A second coat can be applied, if needed. In cases of doubt, test in an inconspicuous area.\nDrying Time:Surface will be dry after approx. 40 to 60 minutes, depending on temperature and humidity.\nCoverage:Approx. 15 to 20m? per litre depending on surface.\nFurther Care:Occasionally add Lithofin KF Tile Polish to the cleaning water (one cup per ten litres) to touch up and maintain the protective film.\nStorage:Closed and cool, frost free. Shelf life of up to 3 years.\nEnvironmental Protection:The contained surfactants are biologically degradable according to EU-regulations. Does not contain any phosphates.\nDisposal:Diluted product may be added to waste water. Containers are made of environmentally friendly polyetylene (PE). Clean containers can be recycled through collection system.\nContents:Non-ionic surfactants (
Visit the Pure Adhesion Ltd website for more information on Lithofin KF Tile Polish For Unglazed Ceramic & Quarry Tiles - 1 Litre