Product Code: 29885
A special product from the LITHOFIN-Range for ceramics, quarry tiles and porcelain (KF). Lithofin KF Limescale Away is a highly effective, concentrated acidic cleaner. The product is nearly odourless, does not generate any vapours and can be completely rinsed away with water.\nTechnical Data:\nDensity: approx. 1,05 g/cm?Appearance: liquid, greenishOdour: fresh, perfumedpH-Value: approx. 1 (concentrate)Flash Point: n.a.Solubility in Water: complete\nProperties:\nLithofin KF Limescale-Away removes limescale, water spots, calcium and similar stubborn deposits quickly and effectively.\nField of Use:\nFor removing encrustations and deposits from sanitary fittings, water taps, kettles, coffee makers and other hot water equipment and household appliances.\nDirections for Use:\nApply undiluted to the wet surface and allow the product to work for 5 to 15 minutes depending on the stubbornness of the deposit. Rinse with plenty of clear water. When cleaning kettles, coffee makers and other hotwater equipment, dilute Lithofin KF Limescale-Away 1:5 with water. Rinse the equipment several times with the solution, allowing it to work for a few minutes each time. Thoroughly rinse with clear water at least three times.\nPlease Note:\nDo not use on surfaces sensitive to acid such as marble, limestone, aluminium, enamel, bronze, some decorative tiles and plastics, wood and textiles, etc. When in doubt, try the product in an inconspicuous area.\nCoverage: up to 5m? per 500ml.\nStorage: Keep closed, cool and dry. Shelf life of up to five years.\nEnvironmental Protection: Surfactants are biologically degradeable in accordance with EU-regulations.\nDisposal: Diluted product may be added to waste water. Containers are made of environmentally friendly polyethylene (PE). Clean containers can be recycled through collection systems.\nSafety: Contents: acids; non-ionic surfactants; auxilliary agents.Risk and Safety Phrases: keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.First Aid Procedures: remove contaminated soaked clothing immediately. In case of inhalation, ensure of fresh air. In case of contact with skin wash off immediately with soap and water. In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice. In case of ingestion, do not induce vomiting. If swallowed by mistake drink plenty of water and seek medical treatment.Emergency Procedures: In case of spill or other release, take up with absorbent material (e.g. sand, sawdust, general-purpose binder). Ensure adequate ventilation. Product does not burn, fire-extinguishing activities according to surrounding.Special protective equipment for fire fighters: Use breathing apparatus with independent air supply.\nAdditional Information is listed on the Material Safety Data Sheet. ADR2003: not a dangerous good.\nPackaging: 500ml bottle with child-proof cap (10 per box)\nThis information should be considered to be informal and non-binding. The products must be used according to local conditions and materials. Where no previous experience is available, or in cases of doubt, test the product in an inconspicuous area. (GB11.04gps/12.02)
Visit the Pure Adhesion Ltd website for more information on Lithofin KF Limescale Away 500ml