Product Code: 29887
A special product from the LITHOFIN-Range for fully vitrified ceramic and porcelain tiles (KF). Lithofin KF Conditioning Cleaner is a mildly alkaline maintenance product formulated for every-day use.\nTechnical Data:Density: approx. 1,0 g/cm?Appearance: liquid, bluishOdour: pleasantpH-Value: 9 to 12Flash Point: n.a.Solubility in Water: complete\nProperties:This high-yielding concentrate is added to the wiping water, and it cleans and maintains in one simple operation. Selected raw materials ensure an optimum, streak-free cleaning effect without building up layers. Surfaces become more attractive and less sensitive with continued use.\nField of Use:For regular maintenance cleaning of all polished and unglazed vitrified ceramic and porcelain tile surfaces which are subject to normal levels of wear and tear.\nDirections for Use:Add one squirt of Lithofin KF Conditioning Cleaner to a 10 litre bucket of water. Wipe the floor with a wet cloth, then wring out the cloth and wipe again in order to remove the product. The surface does not need to be rinsed afterwards. Do not walk on the surface until it is completely dry.\nPlease Note:Do not leave the product on sensitive surfaces such as polished marble, etc. In cases of doubt, try the product in an inconspicuous area.\nAdvice:Surfaces which are subject to high levels of wear and tear should occasionally be cleaned with Lithofin FZ Intensive Cleaner. Calcium deposits, rust and soap scum can be removed with Lithofin KF Ceramic-Clean.\nStorage:Keep closed, cool and dry. Shelf life of up to five years.\nEnvironmental Protection:Surfactants are biologically degradeable in accordance with EU-regulations.\nDisposal:Diluted product may be added to waste water. Containers are made of environmentally friendly polyethylene (PE). Clean containers can be recycled through collection systems.\nContents:Anionic surfactants; non-ionic surfactants; auxiliary agents.\nRisk and Safety Phrases:Irritating to eyes. Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. If swallowed, seek medical advice immediately and show this container or label.\nFirst Aid Procedures:Remove contaminated soaked clothing immediately. In case of inhalation, ensure of fresh air. In case of contact with skin wash off immediately with soap and water. In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice. In case of ingestion, do not induce vomiting. If swallowed by mistake drink plenty of water and seek medical treatment.\nEmergency Procedures:In case of spill or other release, take up with absorbent material (e.g. sand, sawdust, general-purpose binder). Ensure adequate ventilation. Product does not burn, fire-extinguishing activities according to surrounding. Additional Information is listed on the Material Safety Data Sheet. ADR2003: not a dangerous good.\nPackaging:1 litre bottle with child-proof cap (10 per box)5 litre canister (2 per box)\nPlease Note:Statements concerning environmental and safety issues refer to the product as delivered (concentrated). This information should be considered to be informal and non-binding. The products must be used according to local conditions and materials. Where no previous experience is available, or in cases of doubt, test the product in an inconspicuous area. (GB11.04gps/10.03)
Visit the Pure Adhesion Ltd website for more information on Lithofin KF Conditioning Cleaner Everyday Cleaner - 1 Litre