Product Code: 30504
Natural stones often contain traces of iron, which may oxidise when they come in contact with water either through rain or cleaning. The result of this oxidation is that the stonedevelops rust and discolouration.Lithofin BERO is specifically formulated to remove these blemishes.DescriptionAcid based stone cleaner which contains special rust preventing components designed for long-term effect.PropertiesLithofin BERO chemically changes the rust particles, thereby removing rust discolouration regardless of whether it is a result of the iron in the stone or of environmental influences. Cement residues and similar dirt are also removed.Field of UseLithofin BERO removes rust and rust discolouration and isalso suitable for removing cement residues from iron containing natural stones. Suitable for acid resistant hardstones such as serizzo, cresciano, calanca, and for granites such as sardo white, etc. On polished surfaces, the effectiveness of the product is limited. Suitable for indoor and outdoor use.Directions for UseDilute Lithofin BERO up to 1:3 with water depending on thetype and stubbornness of the blemish. Apply the solution to the surface and spread it evenly. After approx. 4 to8 hours, rinse with plenty of clear water. In case of very stubborn rustdiscolouration, repeat this procedure after several days.During the cleaning procedure, the surface must be protected from water.\nPlease Note:Always test the product in an inconspicuous area prior to use. Lithofin BERO must not be used onpolished or fine honed marble and limestone, engineered stone or other acid sensitive surfaces. Enamel, zinc and other acid sensitive materials are attacked by the product.Some natural stones may become slightly darker, this effect will disappear after some time.However, always treat the entire surface to ensure an even appearance. In case of single spots, we recommend Lithofin MN Builder’s Clean.Coverage:approx. 7 to 15m? depending on the surface.Advice: iron containing stones should always be cleaned with Lithofin MN Builder’s Clean because this product removes light rust discolouration and prevents them from forming.Should Lithofin CEMENT-AWAY be needed because of strong dirt deposits, an after treatment with Lithofin BERO is necessary.\nTechnical Data:Density: 1,2 g/cm?pH-Value:
Visit the Pure Adhesion Ltd website for more information on Lithofin Bero PRO - Rust Remover & Stone Cleaner - 1 Litre