Product Code: 29880
The Lithofin Anti Slip Set consists of a Basic Cleaner and the Anti-Slip Fluid. This set is suitable for making slippery ceramics, enamel and natural stone surfaces slip resistant.\nContents:\n\n250ml Lithofin Basic Cleaner\n250ml Lithofin Anti-Slip \n2 Sponges\nPlastic Gloves\n\nCoverage for up to 6sq / m safety\nBasic Cleaner: mildly alkaline for removing oily and greasy dirt from ceramics and natural stone. Technical Data:Density: ca. 1,0 g/cm? pH-Value: ca. 10 Appearance: liquid, yellowish Odour: non-specific Solubility in Water: complete Anti-Slip: fluorid containing product for roughing ceramic and natural stone surfaces. Technical Data: Density: ca. 1,0 g/cm? pH-Value: ca. 3 Appearance: liquid, red Odour: non-specific Solubility in Water: complete Properties\nThe Lithofin Anti-Slip Fluid chemically reacts with the surface of ceramics, enamel and silicate containing natural stones. The product etches small cavities into the surface, therby increasing the slip resistance.\nField of Use: For rendering surfaces slip resistant. Especially suitable for porcelain, glazed ceramics, enamel and natural stone such as granite, gneiss, etc. This treatment also works on wet surfaces.\nDirections for Use:\n\nPreparation: the surface must be thoroughly cleaned. Dilute Lithofin Basic Cleaner up to 1:5 with water and apply with a sponge. Vigorously scrub the surface with the rough pad on the sponge. Carefully rinse the clean surface with plenty of water to remove all product residues. \nTreatment: first try the product in an inconspicuous area in order to evaluate the effect and determine the working time. Apply Lithofin Anti-Slip to the clean and dry surface and immediately distribute the product evenly with the second sponge (wear the enclosed protective gloves). There should be a visible liquid film on the surface. During working time, repeatedly wipe and redistribute the product with the sponge, add more product if necessary. \nDo not allow the product to dry (Lithofin Anti-Slip only works as a liquid). Avoid foam. Continuously check the slip resistance by moving the sponge across the surface. Stop treatment when the desired effect is reached. \nEnd Treatment: add water and a few drops of Lithofin Basic Cleaner to the solution on the surface, distribute immediately and wipe off the surface. Rinse well with clean water. \nPlease Note: especially the undiluted product must not come in contact with sensitive surfaces (polished limestone, marble, lacquer, wood, carpets, etc.). Immediately wash off any splashes. Protect metals and other adjoining areas. The surface to be treated must be completely clean and free of grease and care product residues. The surface temperature should be between 10?C and 25?C during application. Switch off under floor heating. \n\n?\nThe surface is permanently altered on a microscopically small scale. Not suitable for acrylates and other plastics. High gloss and polished surfaces will become slightly less shiny. Natural stone may become lighter in colour.\nAlways try the product prior to use.\nStorage:Closed and cool in wee ventilated area. Up to 3 years. Further Treatment Granite and other natural stones should be impregnated with Lithofin MN Stainstop and maintained with Lithofin MN Wash & Clean.\nEnvironmental Protection:The contained surfactants are biologically degradable according to EU-regulations. Does not contain any phosphates.\nDisposal:Diluted product may be added to waste water. Containers are made of environmentally friendly polyetylene (PE). Clean containers can be recycled through collection system.\nBasic Cleaner:Xi, irritant. Irritating to eyes. Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. If swallowed, seek medical advice immediately and show this container or label. Contents according to EU-recommendations: < 5% anionic wetting agents, < 5% non-ionic wetting agents, 5 - 10% Butylglycol.\nAnti-Slip Fluid:C, corrosive. Harmful if swallowed. Causes burns. Keep locked up and out of the reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable protective clothing, gloves and eye/face protection. In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). Contents according to EU-recommendations:
Visit the Pure Adhesion Ltd website for more information on Lithofin Anti Slip Permanent Anti Slip Treatment - 6 Sq m Kit