Hanafinn Rejuvenata ACTIVE - Cleaner for Indoor Natural Stone & Hard Surfaces - 946ml

Product Code: 31133

Typical applications\nRejuvenata ACTIVE is recommended for cleaning indoor surfaces including kitchen floors, bathrooms, eating and entertaining areas. Rejuvenata ACTIVE can be used for light regular mopping, heavy duty cleaning and removal of stains caused by oil / grease, mold, leaf marks, food and beverages.\nRejuvenata ACTIVE is safe for domestic and commercial cleaning of hard surfaces, including:\n\nAll natural stone (including acid sensitive, calcite based stones such as marble and limestone) \nP orcelain, ceramic and clay tile \nGrout\nVinyl and unfinished wood (with no stain, oil or other coatings).\n\nBenefits\n\nRejuvenata ACTIVE contains 3 different, powerful natural active enzymes (similar to those in your gut) that quickly break down oils, grime, food residue, and stains caused by mold. It is environmentally responsible and safer to use than many traditional chemical cleaners.\nSuper Concentrate -\n ?only 3 to 4 capfuls in a bucket of water required for regular mopping \nEffective for heavy duty cleaning and stain removal (using a higher concentration)\n For domestic and commercial cleaning, including in scrubbing machines.\n Hyper-biodegradable - decomposes quickly into oxygen and natural minerals\nSafe to transport and gentler on skin than traditional alkaline / caustic / solvent cleaners\nZero VOC\n\nLIGHT DUTY CLEANING / MOPPING\n\nTEST PRODUCT ON A SMALL AREA BEFORE FULL APPLICATION.\nRemove dust and dirt from surface by sweeping or vacuuming \nPour 2-4 capfuls of Rejuvenata ACTIVE into a bucket of clean warm water (2 gallons / 8 Litres). Stir briefly. More soiled surfaces may need a higher concentration.\nMop the surface, rinsing the mop frequently. If the mixture in the bucket becomes too dirty, rinse the mop thoroughly in clean water and mix a fresh bucket of cleaner and water to continue mopping.\nIn light concentrations, the cleaner should not leave residue. If used in heavier concentrations, light mopping with clean water may be necessary\n\nHEAVY DUTY CLEANING of HEAVILY SOILED SURFACES and STAIN REMOVAL\n\nTEST PRODUCT ON A SMALL AREA BEFORE FULL APPLICATION.\nRemove dust and dirt from surface by sweeping or vacuuming.\nPour 1/3 of a bottle of Rejuvenata ACTIVE into a bucket of clean warm water (2 gallons / 8 Litres). Stir briefly.\nGenerously apply to the surface and leave for a few minutes to allow the enzymes to start breaking down the stain.\nBefore the cleaner dries on the surface, scrub with a suitable brush or deck scrubber.\nRinse thoroughly with clean water and a mop\nFor stains or spots where normal heavy duty cleaning has not produced a perfect result, apply Rejuvenata Active neat, allow to sit for a few minutes, scrub with a suitable brush before it dries and rinse thoroughly. Repeat if necessary.\n