Flex CS 60 Wet Diamond Stone Cutter 110v

Product Code: 31104

The new CS 60 WET 110v is a further development of the proven CSW 4161.\nWith the new CS 60 WET you can not only cut cleanly and precisely, you can also make a perfect mitre cut in the range from 0-45?. It also has a cutting depth adjustment from 0-60 mm (with a guide rail of 0-54 mm) and as a consequence is optimally suited to applying weather grooves and water drainage grooves to window sills or stair treads.\nThe CS 60 WET is the ideal machine for exact cuts in natural and artificial stone by stonemasons, kitchen and shop-fitters, tilers as well as in gardening and landscaping.\n\nPowerful, tough 1400 watt motor with high torque. Motor protection made of rubber prevents the direct intake of spray water and therefore protects the motor.\nParallel stop with guide edge mounted upward increases the saw table contact surface. With the guide edge mounted downward, a cut parallel to the workpiece edge is possible.\nThe gearbox housing, the protective cover as well as the guide plate are made of high-quality magnesium die-castings. Ideal for tough applications, e.g. in gardening and landscaping.\nThe cutting depth can be adjusted infinitely and without the need for tools. Ideal in conjunction with the guide rail for applying weather grooves and water drainage grooves.\nThe scale fitted permits easy and exact angle adjustment from 0-45?\nErgonomically shaped handle with on/off switch and locking for continuous operation.\nQuick coupling made of brass for easy connection of a ?“ water hose.\nMarkings on the guide table for cuts at 0?/30?/45? for quick orientation.\nSpecially designed water feed for optimal cooling of the diamond tool.\nPortable residual current device (PRCD) integrated into the cable for safe working\nEasy tool change due to built-in spindle stop.\nThe front handle also aids the exact guiding of the machine.\n\nDiamond stone separator for wet cuts, mitre cuts\n\nup to 45 ?, with GFCI operator\nHigh-performance motor: extra powerful for stone cutting and joint milling\nContinuous cut depth setting from 0-60 mm, with rail guide up to 54 mm. In the mitre cut from 0-44 mm, with guide rail up to 38 mm\nContinuous angle adjustment for mitre cuts from 0-45?\nCut marking at the base plate from 0?/30?/45? for rapid orienta-tion\nHigh-quality magnesium die-castings for protective cover and base plates\nMotor protection made of rubber prevents the direct intake of spray water\nWater supply: for an effective cooling of the diamond blade\nQuick-fit brass coupling: for 1/2“ water hose\nGFCI operator protector circuit breaker: integrated in cord\nIdeal for: Inserting water grooves in window sills or steps, work tops, facade slabs, terazzo slabs in garden design & landscaping, joint renovation in the floor\n\nSpecifications\n\nDiamond cutting disc ? / arbor (inside ?) - 170 / 22,2 mm\nCutting depth / with guide - fence 60 / 54 mm\nMitre cuttings 0-45?\nDepth of cut - mitre cut 5-44 mm\nDepth of cut - mitre cut with guide rail 0-38 mm\nNo load speed 6200 rpm\nPower input 1400 watt\nPower output 840 watt\nWeight 4,5 kg\n\nStandard equipment:\n\n1 diamond cutting disc with segmented cutting edge\n1 wrench for saw blade change\n1 parallel guide fence\n1 plastic system case\n1 case insert\n