Everbuild STIXALL Sealant & Adhesive (300ml) - White

Product Code: 30276

Product DescriptionEVERBUILD STIX-ALL is a one part, chemically curing solvent free sealant and adhesive combining the best qualities of silicone and polyurethane technologies. It is specifically designed for adhering most common building surfaces to each other and themselves?\nBenefits•?Incredible initial grab, no slip and gap filling properties.•?High bonding strength•?Interior and Exterior Use•?Can be applied to Wet Surfaces•?Totally Waterproof & Weatherproof•?Quick Curing.•?Overpaintable if required•?Powerful biocide prevents mould growth•?Solvent Free•?Resistant to temperature extremes -40?C to +150?C•?Resistant to Chemicals & Petrol (10% dilute acids/alkalis, most solvents)•?Excellent primer less adhesion to most surfaces, including metals, most plastics, glass, concrete, plaster, plasterboard, polyester, Perspex, glass, wood, enamel, painted surfaces etc etc.\nAreas For Use•?Sealing and bonding in almost every application imaginable. The following are just some examples.•?As a high quality nail replacement adhesive, even to damp surfaces.•?External and internal perimeter pointing around doors and windows, especially in mobile structures such as caravans and boats.•?Bonding mirrors to most common substrates.•?Automotive gap filling and sealing•?Sealing vertical expansion joints.???•? Jointing cladding panels.•?Bonding difficult materials such as specialised polymer systems, metals and fibreglass•?Any application requiring high performance, durable sealing and bonding of joints.•?Applications where resistance to chemical spillage is required (garage forecourts etc)\nSurface PreparationAll surfaces must be clean and dust free. Surfaces may be damp, but have no standing water.\nApplication Cartridge - Cut the tip of the cartridge taking care not to damage the thread. Fix nozzle, cut aperture to required width and apply with a standard sealant gun.\nSqueezy Pack – remove plastic cap. Cut nozzle with a sharp knife to required aperture. Squeeze tube from base with light finger pressure and apply as necessary. Remove any excess material from nozzle prior to replacing cap.\n?