Dry Treat STAIN PROOF Ultimate Protection For Stone - 18.9 Litre - FREE DELIVERY

Product Code: 30704

Please Note: There is a lead time of appoximately 3-4 working days on this productPlease contact us should you require more information or ETA's\nPlease contact us for TRADE prices?\nSTAIN-PROOF™ is an impregnating, invisible and breathable sealer that protects exposed natural stone, tiles, pavers, concrete and grout from damage caused by water, salts and oil-based stains.\nTreated indoor and outdoor surfaces become easier to clean, maintain, and keep looking good for longer. STAIN-PROOF™ provides lasting protection for natural stone, concrete, terracotta tile, cast stone, paving, sandstone, limestone, brick and grout.\nFor maintanence of your tiles once sealed, use Hanafinn Rejuvenata ACTIVE for daily / weekly cleaning.\nCLICK HERE for your full maintenance guide for sealed porous surfaces.CLICK HERE for a general care sheet for natural products.\nTypical applications:\nSTAIN-PROOF™ is suitable for a wide variety of applications, including building facades, floors, walls, swimming pool surrounds, patios, garages, kitchens and entertaining areas.\nBenefits:\n\nSTAIN-PROOF™ is able to repel stains, graffiti and food products making cleaning easier.\nNon film-forming. \nAble to work without changing the appearance of the surface - keeps the original look.\nSuitable for indoor and outdoor use. \nAble to greatly reduce water uptake and minimise moss growth, freeze thaw spalling and efflorescence.\nAn excellent chloride ion salt screen.\nIdeal for marine and pool areas.\nHighly water vapour permeableable to breathe so there is no build-up of subsurface moisture allowing it to dry out. \nDeeply penetrating protecting against weathering and wearing.\nVery alkali resistant. \nWon't break down in contact with cement based materials.\nAble to seal hairline cracks up to 0.3 mm (0.012 in.) and does not flake or peel.?\n\nWarranty: A 15-YEAR PERFORMANCE WARRANTY is offered when product applied by an Accredited Applicator following our written instructions and surface is maintained regularly using our written maintenance system, as outlined in our warranty document. Spills should still be cleaned up immediately to minimise absorption.\nApplication Rates: Total application rate is approximately one litre per 2 to 25 sq. metres (20 to 250 sq. feet per quart) depending on absorption.\nHow To Use:\n\nALWAYS TEST PRODUCT ON A SMALL AREA FIRST and allow a 24 hour cure time to determine the ease of application and desired results.?Ensure surfaces to be treated are dry, clean and free of residues. \nProduct is to be applied without thinning. \nGenerously saturate the surface with product using a low-pressure hand spray, a clean brush, or similar. Surface should have a mirror-like wet look for 3-5 seconds. Avoid contact with surrounding areas. \nWhen the surface becomes touch dry, or a minimum of 10 minutes, repeat Step 4. Total application rate is approximately one litre per? 2 to 25 sq. metres (20 to 250 sq. feet per quart) depending on absorption. \nWhen the surface becomes touch dry, or a minimum of 10 minutes, to allow the product to penetrate into the surface, polish surface with a clean white dry cloth to remove excess product. If you have waited too long and the product has begun to cure and has become more difficult to remove, moistening the cloth with STAIN-PROOF™ should ease polishing. \nUse an organic solvent e.g. methylated spirits to clean equipment.\n\nOnce cured, this product is food contact safe. Sealer will not prevent surface etching, scuff marks or wear and may lighten or darken some surfaces. STAIN-PROOF™ will make the maintenance and cleaning of a treated surface much easier.\nPrecautions: Do not take internally. Apply when surface temperature is between 5 - 35?C(40 - 95?F). Avoid moisture contact with the surface for six hours after application. Protect surrounding areas from over-spray. Keep away from drains, plants, water and soil. Use only in well-ventilated areas. Use a positive pressure respirator if ventilation is inadequate.? Wear suitable solvent-resistant gloves, protective clothing, safety goggles and an organic vapour respirator during application. Avoid applying in windy conditions. Wash hands thoroughly. Active content: 50 per cent active content in alcohol.\nPack Size:?946ml, 3.79 & 18.9 litre container\n*Please Note: We are unable to ship this item outside of mainland Great Britain (Northern Ireland, Channel Islands, Republic of Ireland etc.) in accordance with regulations on the transport of dangerous goods.