Trend UNIBASE Universal Sub Base, Complete With Bush & Pins

Product Code: TRE-UNIBASE

Trend UNIBASE Universal Sub Base, Complete With Bush & Pins

The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes.

It will fit directly to most routers.

Line-up pin used with a 16mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base.

Suits collet sizes 1/4 inch, 8mm, 12mm and 1/2 inch.

Fitting instructions:-
The line-up pin fit into the collet and is plunged through the router base.
The line-up bush is fitted into the Unibase and secured.
This is then placed over the line-up pin and rotated in order to line up the fixing holes.
The Unibase screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes.
These range from 10mm up to 30mm (GB10 - GB32).
For larger diameter cutters a 40mm guide bush (GB40) is available.