JT105HOT Hot Water pumping station

JT105HOT Hot Water pumping station

Complete wastewater pumping unit for installation at floor level, and fitted with a submersible Hot Water pump complete with 10M of cable.

This lifting station is suitable for the removal of high temperature liquids up to 90 degrees Celsius, containing solid particles up to 20 mm, from domestic and commercial appliances such as dishwashers and washing machines located below the sewer level, in accordance with EN 12050-2.

Also suitable for drain down or emergency overflow of heating systems.

Features

Compact triangular design optimises space

Fitted with JT105HOT Water pump, complete with non-return valve and level control.

A separate check valve should be used at heads over 3 m.

Solids handling up to 20 mm

Pumping of high temperature wastewater up to a maximum of 80 �C.

(90 �C intermittently)

Seven ports (5 x 40 mm, 2 x 50 mm), ready-prepared with seals, which can be used for inflow, discharge, power cable, or flexible hose connection to a washing machine (�" adaptor supplied).

Odour-tight lid with odour lock and venting, including charcoal odour filter and overflow protection.

Alarm switch available as accessory

Tank

Synthetic, corrosion-resistant, gas- and odour-tight tank, in accordance with EN 12050-2. Supplied as standard with pump, automatic level control and non-return valve.

Capacity: 28 litres

Motor

Water pressure sealed, squirrel cage 2-pole induction motor, with double shaft seals and oil chamber.

Electronic monitoring of stator temperature and overcurrent. Insulation: Class F (155 �C).

Protection type: IP 68