Fluids for Commercial & Domestic Heating Systems
Key Steps when considering the importance of fluids in your heating systems:
Cleansing & Protection
Sentinel X300
X300 System Cleaner is specifically designed for new central heating systems. It flushes out flux and installation debris from new indirect heating systems. X300 cleaner helps to maintain system efficiency and conserve fuel.
Cleans new heating systems up to 6 months old
Powerful, heavy duty cleaning action.
Removes installation debris, swarf, flux residues & greases
Eliminates corrosive flux residues which could give rise to rapid pin-holing corrosion of radiators.
Prevents harmful copper deposits being left in the system.
An ideal preparation for X100 inhibitor.
Suppled in 1L, 10L and 20 litre tubs
Sentinel X300 from Go Geothermal Ltd
Sentinel X400
Specifically designed for existing systems Sentinel X400 is a non-acid treatment for cleaning older heating systems, restoring circulation to radiators and pipework. A ruthlessly efficient way to eliminate the build-up of magnetite sludge, X400 is the quick and easy way to eliminate cold spots and restore full heat emission. Helps to improve and maintain system efficiency and conserve fuel. Sentinel X400 from Go Geothermal Ltd
Eliminates radiator cold spots
Can be used in all systems.
Prepares existing systems for the installation of new boilers, pumps or panels.
Does not cause pin-holing or leaks.
Supplied in 1L,10L, 20 litre tubs
Sentinel X200
Sentinel X200 boiler noise reducer is a unique, life-long system treatment for the elimination boiler noise.
Safe to use in all types of indirect central heating systems, X200 noise reducer will quickly pay for itself in reduced fuel usage.
Eliminates boiler noise "kettling".
Restores boiler efficiency.
Safe and non-corrosive.
No need to flush - stays in system.
Supplied in 20 litre tubs
Sentinel X200 from Go Geothermal Ltd
Freeze Protection
Some boiler systems require protection against freezing as well as protection from scale formation and corrosion. Sentinel X500 combines the market leading technologies available in X100 inhibitor with a non-toxic antifreeze in one simple to use product.
Sentinel X500
X500 provides protection against scale and corrosion in all types of indirect heating systems, including those containing aluminium components, whilst preventing freezing.
Prevents freezing
Enhanced scale & corrosion protection
Protects all system metals
Ensures optimum boiler efficiency
Prevents boiler noise
Prevents pin-holing
Helps prevent the formation of hydrogen gas
A simple test kit is available to check levels
For best results, systems should be cleansed and flushed in accordance with BS7593:2006 new systems and those up to 6 months old with Sentinel X300, existing systems with Sentinel X400 or Sentinel X800 Jetflo.
X5OO should be dosed at a minimum of 20% of total system volume to give frost protection of -8C, a 30% solution will protect down to -13C.
Central Heating Inhibitor
Sentinel X100
Formulated as a multipurpose treatment to inhibit corrosion, scale, boiler noise and hydrogen gassing in all types of indirect heating systems including those containing aluminium components.
Sentinel X100 is suitable for use in all waters, both hard and soft. The formulation is completely non-toxic. 1 litre of Sentinel X100 is sufficient to treat a typical domestic system of up to 10 radiators.
Features and Benefits:
Effectively controls scale and corrosion
Helps prevent the formation of hydrogen gas
Suitable for all metals including aluminium
Easy to handle - Non-toxic and biodegradable
Concentration is easily checked with a Sentinel Test Kit or a conductivity meter
Supplied in 1L, 10L and 20 litre tubs
Sentinel X100 from Go Geothermal Ltd
We recommend regular use of the Sentinel X100 Test Kit for central heating systems containing Sentinel X100 Inhibitor as it is a versatile treatment intended to control the risk of corrosion and scaling. The Sentinel X100 Test Kit allows you to check that the dosage of Sentinel X100 inside the system is sufficient to provide protection.
Sentinel SystemCheck is a water treatment analysis service which provides rapid confirmation to installers, engineers, homeowners and authorities that a central heating system has been correctly cleaned and then protected with Sentinel X100 Inhibitor. It can be used during the commissioning of a new system or an older system following the replacement of any components.
Key features
Independent laboratory analysis
Validation of correct cleaning and then treatment with Sentinel X100 Inhibitor
Freepost envelope included
Full report of results and recommendations provided digitally or by mail
Sentinel R700 Sanitizer & Biocide
Normal boiler systems do not generally need to be sanitised with R700 because they operate at temperatures well above 60C and therefore there is a general pasteurisation effect. However many biomass boilers do not run on a regular basis or they are so big that the temp in some parts of the system remains low, e.g. underfloor heating. - If you think this is the case then using R700 to sanitise is a wise precaution... if in doubt add R700!
Sanitizer & Biocide
Typical fill is 1 litre bottle for 300L (new system)
3 in 1 advantages
Pre-treatment steriliser
Ideal as a system protector if the collector pipes/vertical probes are to be commissioned at a later date to maintain a sterile environment
Can be added to a system where there exists problems caused by the growth of organisms such as bacteria & fungi. Caused typically by the degradation of thermal fluids or blockages in the pipework system causing unpleasant smells and corrosion of heat exchangers & manifolds etc.
Sentinel R700 From Go Geothermal Ltd
Sentinel Senticlene 8500
A fast acting cleaner for commercial heating and closed cooling/chiller systems.
Removes fouling particulate and sludge from commercial heating systems
Restores full circulation and heat transfer to pipe work and radiators
Ideal for systems requiring quick, immediate and UNPLANNED attention
Can be used prior to a new boiler or chiller installation
Ideal for pre-commission cleaning programmes
Available in 20 litre tubs
Sentinel Senticlene 8500 from Go Geothermal Ltd
Sentinel Senticide 7500
A biocide for commercial heating and closed circuit cooling/chiller systems. Ideal for low temperature systems without natural pasteurisation.
Effective biocide, algaecide and fungicide
Fast-acting
Effective over wide pH range
Long lasting protection against aerobic and anaerobic bacteria
Low toxicity
Non-corrosive to system metals
Easy to dose
Ideal for pre-commission cleaning programmes
Supplied in 20 litre tubs
Sentinel Senticide 7500 from Go Geothermal Ltd
KalGUARD
Sentinel’s commercial electrolytic lime scale inhibitor for all water heaters.
KalGUARD requires no salt to operate and is an environmentally friendly solution to prevent limescale deposits that saves money through greater energy efficiency, reduced maintenance and enhanced performance of water systems. The technology is listed in the Part L Building Regs Domestic Building Services Compliance Guide.
Only ONE KalGUARD is needed to protect the whole H&C system
Independently proven water treatment chemistry
KalGUARD treatment does not decay with pumping or storage, it permanently protects against limescale
WRAS approved
Delivers value engineering when installed on rising main, CAPEX savings likely with no detriment
in performance
Cleaner taps, showers and valves means bacteria have less places to hide
Keeps systems clean and protects capital investments
Where it replaces a brine water softener, it can deliver an ROI in around 12 months
KalGUARD permanent treatment solution is widely specified & installed for major commercial clients
Visit the Go Geothermal Ltd website for more information on Commercial Solutions