Scaffold Tie and Anchor Load Design Check

Whether the design is one of ours or was produced by another designer, Access Design & Safety provides scaffold tie and anchor load design check with a full report at the end.

Checking is about more than spotting arithmetic errors. We look at whether the design suits the actual site, whether the assumptions hold up and whether the scaffold can be built as drawn.

Scaffold Tie and Anchor Load Design Check: What You Need to Know

Ties hold the scaffold to the building and are often the weakest link. Anchors need testing, tie patterns need to match the design and any removed ties must be put back. A loose tie on a sheeted scaffold is a serious problem.

What Our Design Check Covers

• Review of drawings and calculations against current codes including TG20:21
• Accuracy check on every calculation
• Assessment of site location and prevailing wind loads
• Category 3 (CAT III) independent

Why Choose Access Design & Safety

Our work covers commercial, education, government and MOD, residential, transport, religious and heritage projects. We design and check across most systems, including tube and fittings, Cuplock, Kwikstage, Haki, Layher and Altrad Plettac.

Arrange Your Scaffold Design Check

To book your scaffold design check, call us on 01384 459090 or email info@designsafe.co.uk. Tell us about the job and we will take it from there.