Trend Craftpro Worktop Jig

Product Code: KWJ700JIG

Pins made from ABS plastic for strength. Fixed lengths for 250mm, 300mm, 400mm, 500mm, 550mm, 600mm, 616mm, 650mm and 700mm wide worktops. 7mm (1/2 inch) shank capacity and minimum 1300 watts. Engraved lines for short 65mm bolts and worktop cross-cut. Jig requires: A portable plunge router with 12. Two clamps. Three open-ended bolt recesses (dog bone style) for 150mm bolts. The Trend CraftPro Trade work top jig for up to 700mm worktops Hard wearing solid laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up. Engraved markings for identification of pin holes. Left hand and right hand corners, 400mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps. GB30. 7mm (1/2 inch) diameter and 50mm (2 inch) cut length. A TCT router cutter with 12. Cuts up to 40mm thick worktops with or without anti-drip postformed edge.

A template guide bush with 30mm outside diameter ref. Sold in SINGLES. 10mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up.